MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART D - FUGITIVE EMISSIONS TEST METHOD OF DECK-SEAM LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS
American Petroleum Institute
INTRODUCTION
1 SCOPE
2 REFERENCES
2.1 API References
2.2 ASTM References
3 TERMINOLOGY
3.1 Definitions
3.2 Units of Measurement
3.3 Nomenclature
4 SUMMARY OF TEST METHOD
5 SIGNIFICANCE AND USE
6 LIMITATIONS TO TEST METHOD
6.1 Evaluation of Results
6.2 Low Loss Rates
7 TEST APPARATUS
7.1 Test Apparatus Illustrations
7.2 Test Room
7.3 Test Assembly
7.4 Test Liquid
7.5 Test Apparatus Air Flow
8 TEST ITEM
8.1 Test Item Construction
8.2 Test Item Attachment
8.3 Test Item End Connections
9 PREPARATION OF APPARATUS
9.1 Test Item Placement
9.2 Test Liquid Filling
9.3 Instrumentation Attachment
9.4 Test Room Air Temperature Control
9.5 Sample Pump Startup
9.6 Steady-State Operation
10 INSTRUMENTATION AND CALIBRATION
11 TEST PROCEDURE
12 CALCULATION OF TEST RESULTS
13 REPORT OF TEST RESULTS
14 PRECISION AND BIAS
APPENDIX A UNCERTAINTY ANALYSIS
APPENDIX B METRIC UNITS
APPENDIX C BIBLIOGRAPHY
Establishes a uniform method for measuring evaporative deck-seam loss factors and deck-joint loss factors of mechanically-joined deck seams that are used on internal floating-roof tanks. Also specifies the test apparatus, the instruments, the test procedure, and the calculation procedures to be used. The variables that are to be measured are defined, and quality provisions are stipulated. The format for reporting the values of both the test results and their associated uncertainty are also specified.
| Document Type | Standard |
| Status | Current |
| Publisher | American Petroleum Institute |
| ProductNote | Reconfirmed 2001 |
