SAE J 2044 : 2009

QUICK CONNECT COUPLING SPECIFICATION FOR LIQUID FUEL AND VAPOR/EMISSIONS SYSTEMS

SAE International

More details

More info

1 Scope
2 References
   2.1 Applicable Publications
       2.1.1 SAE Publications
       2.1.2 ASTM Publication
   2.2 Related Publication
       2.2.1 SAE Publication
3 Definitions
4 Size Designation
5 Test Temperatures
6 Functional Requirements
   6.1 Leak Test
       6.1.1 Test Procedure (Low Pressure)
       6.1.2 Acceptance Criteria
       6.1.3 Test Procedure (High Pressure)
       6.1.4 Acceptance Criteria
       6.1.5 Test Procedure (VACUUM)
       6.1.6 Acceptance Criteria
   6.2 Assembly Effort
       6.2.1 Test Procedure (New Parts)
       6.2.2 Test Procedure
       6.2.3 Acceptance Criteria
   6.3 Pull-Apart Effort
       6.3 1 Test Procedure
       6.3.2 Acceptance criteria
   6.4 Side Load Capability
       6.4.1 Test Procedure
       6.4.2 Acceptance Criteria (Side Load Leak Test)
       6.4.3 Test Requirement (Side Load Fracture Test)
       6.4.4 Acceptance Criteria
   6.5 Resistance to Evaporative Emissions
       6.5.1 Test Procedure
       6.5.2 Acceptance Criteria
   6.6 Electrical Resistance
       6.6.1 Test Procedure
       6.6.2 Acceptance Criteria
7 Design Verification/Validation Testing
  7.1 Corrosion
      7.1.1 Test Procedure
      7.1.2 Acceptance Criteria
  7.2 Zinc Chloride Resistance
      7.2.1 Test Procedure
      7.2.2 Acceptance Criteria
  7.3 External Chemical and Environmental Resistance
      7.3.1 Test Procedure
      7.3.2 Fluid or Medium
      7.3.3 Acceptance Criteria
  7.4 Fuel Compatibility
      7.4.1 Test Procedure
      7.4.2 Test Fuels
      7.4.3 Test Requirement
      7.4.4 Acceptance Criteria
  7.5 Life Cycle
      7.5.1 Test Procedure
      7.5.2 Vibration Frequency
      7.5.3 Acceleration
      7.5.4 Vibration Duration
      7.5.5 Fluid Pressure
      7.5.6 Fluid Flow (Liquid Fuel Quick Connectors Only)
      7.5.7 Test Duration
      7.5.8 Test Cycle
      7.5.9 Acceptance Criteria
  7.6 Flow Restriction
  7.7 Elevated Temperature Burst
      7.7.1 Test Procedure 16
      7.7.2 Acceptance Criteria
8 Design Verification/Validation and In-Process Testing
  Matrix
9 Notes
  9.1 Marginal Indicia
Appendix A Mating Tube End Template Examples

Abstract

Describes standard tube end form dimensions so as to guarantee interchangeability between all connector designs of the same size and the standard end form.