Description / Abstract: This specifications covers the materials and performance of Ethylene Propylene Diene Monomer (EPDM) sealings in the cooling circuit. EPDM rubber is a terpolymer of Ethylene, Propylene and Diene monomers.

Material Description. Materials covered by this specification are divided into six (6) EPDM "Types":

Note: Continuous and Excursion temperature limits are as defined by the Vehicle Technical Specifications (VTS).

•Type A: EPDM for sealing radiator, sulfur cured; -35 °C to +125 °C continuous, +150 °C excursion.

•Type B: EPDM for sealing radiator, peroxide cured; -35 °C to +150 °C continuous, +175 °C excursion.

•Type C: EPDM for sealing in engine applications, peroxide cured, better compression set; -35 °C to +150 °C continuous, +175 °C excursion.

•Type D: EPDM O-rings in water circuit, sulfur cured; -35 °C to +125 °C continuous, +150 °C excursion.

•Type E: EPDM for gasket, peroxide cured, with a functional temperature range of -35 °C to +135 °C. The limits are defined by ASTM D1329 TR10 and the continuous upper limit by SAE J2236.

• Type F: EPDM for gasket, peroxide cured, with a functional temperature range of -35 °C to +150 °C. The limits are defined by ASTM D1329 TR10 and the continuous upper limit by SAE J2236.