MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS
American Petroleum Institute
0 INTRODUCTION
1 SCOPE
2 REFERENCES
3 DEFINITIONS
4 SIGNIFICANCE AND USE
5 SAFETY HEALTH PRECAUTIONS
6 SAMPLE CONTAINERS
7 SAMPLE CONTAINER LABELS
8 SAMPLE CONTAINER SHIPPING ENCLOSURES
9 SAMPLE STORAGE AND DISPOSAL
10 HANDLING AND COMPOSTING SAMPLES
11 SAMPLE MIXING METHODS
12 SELECTION OF SAMPLE MIXING METHOD
APPENDIX A - GUIDE FOR SELECTING SAMPLE CONTAINERS
APPENDIX B - ACCEPTANCE TEST FOR POWER MIXER AND SAMPLE
CONTAINER COMBINATIONS
APPENDIX C - SAFETY AND HEALTH PRECAUTIONS
Describes the handling, mixing, and conditioning procedures required to ensure that a representative sample of the liquid petroleum or petroleum product is delivered from the primary sample container/receiver into the analytical test apparatus or into intermediate containers.
This practice covers the handling, mixing, and conditioning procedures that are required to ensure that a representative sample of the liquid petroleum or petroleum product is delivered from the primary sample container/receiver into the analytical test apparatus or into intermediate containers.
| Document Type | Standard |
| Status | Current |
| Publisher | American Petroleum Institute |
| ProductNote | Reconfirmed 1995 |
