CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS PART 2 - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
International Electrotechnical Committee
FOREWORD
1 Scope
2 Normative references
3 IEC type designation
4 Common features
4.1 Mounting dimensions
4.2 Mating information
4.3 Survey of styles
5 Dimensions
5.1 General
5.2 Fixed board connectors
5.3 Free board connectors
5.4 Mating information
5.5 Accessories
5.6 Mounting information for fixed board connectors
5.7 Mounting information for free board connectors
6 Gauges
6.1 Sizing gauges and retention force gauges
6.2 Test panel (for voltage proof test)
7 Characteristics
7.1 Climatic category
7.2 Electrical
7.3 Mechanical
8 Test schedule
8.1 General
9 Quality assessment procedures
9.1 Qualification approval testing
9.2 Quality conformance inspection
9.3 Delayed delivery, re-inspection
10 Ordering information
Annexes
A Test phase BP 3.2: Corrosion, industrial atmosphere
B Special contacts for connectors Style M
Applies to groups of related two part connectors for use with printed boards, ranging from connectors with high contact density for low voltage applications to connectors for heavy currents and high voltages having fewer contacts (Types B, C, D, F and G). Also applies to Type M two part connectors supplied in alternative versions having 2, 4 or 6 holes for fitting special contacts, eg. coaxial, for high voltages or heavy currents (see Appendix A), as well as 78, 60 or 42 normal contacts identical with those of Group C. Applies further to two part connectors of Types Q, R, S, U and V whose male contacts are fitted to the fixed connectors and the female contacts to the board mounted connectors. The fixed connectors are provides either with solder contacts or with crimp, wrap or pressure contacts.
| Document Type | Standard |
| Status | Current |
| Publisher | International Electrotechnical Committee |
| Committee | SC 48B |
