IEC 60404-9 : 1.0

Table of Contents

FOREWORD
PREFACE
Clause
1 Scope and field of application
2 Definitions
  2.1 Flatness (wave factor)
  2.2 Residual curvature
  2.3 Edge camber
  2.4 Deviation from the shearing line due to internal
      stresses
  2.5 Burr height
3 Test methods
  3.1 Flatness
      3.1.1 Test specimen
      3.1.2 Measuring procedure
  3.2 Residual curvature
      3.2.1 Test specimen
      3.2.2 Measuring procedure
  3.3 Edge camber
      3.3.1 Test specimen
      3.3.2 Measuring procedure
  3.4 Deviation from the shearing line due to internal
      stresses
      3.4.1 Test specimen
      3.4.2 Measuring procedure
  3.5 Burr height
      3.5.1 Test specimen
      3.5.2 Measuring procedure
4 Test report
Figures

Abstract

This standard defines the test methods used for the determination of the following geometrical characteristics of magnetic steel sheet and strip; flatness, residual curvature, edge camber, deviation from the shearing line, burr height of cut edges.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
Pages
ISBN
Committee	TC 68
Superseded By	IEC 60404-9:2018