IEC 61094-4 : 1.0
IEC 61094-4 : 1.0
MEASUREMENT MICROPHONES - SPECIFICATIONS FOR WORKING STANDARD MICROPHONES
International Electrotechnical Committee
MEASUREMENT MICROPHONES - SPECIFICATIONS FOR WORKING STANDARD MICROPHONES
International Electrotechnical Committee
FOREWORD<br>Clause<br>1 Scope and object<br>2 Normative references<br>3 Definitions<br> 3.1 Working standard microphone <br> 3.2 Principal axis of a microphone <br> 3.3 Reference plane of a microphone <br> 3.4 Effective front volume of a microphone <br> 3.5 Correction grid<br>4 Reference environmental conditions <br>5 Classification of working standard microphones <br> 5.1 General<br> 5.2 Type designation<br>6 Characteristics of working standard microphones <br> 6.1 Sensitivity<br> 6.2 Effective front volume <br> 6.3 Upper limit of the dynamic range of a microphone <br> 6.4 Linearity range of the microphone sensitivity <br> level <br> 6.5 Static pressure dependence of microphone <br> sensitivity <br> 6.6 Temperature dependence of microphone sensitivity <br> 6.7 Humidity dependence of microphone sensitivity <br> 6.8 Stability of microphone sensitivity <br> 6.9 Pressure equalizing leakage <br>7 Specifications<br> 7.1 Mechanical dimensions<br> 7.2 Electro-acoustical specifications <br> 7.3 Identification markings <br>Annex A Provisional ground-shield reference <br> configuration for type WS3 microphones
Applies to working standard microphones. Specifies mechanical dimensions and certain electroacoustical characteristics for working standard microphones used in measuring systems for the determination of sound pressure to enable these microphones to be used as transfer standards in the calibration of acoustic measurement instruments.
Document Type | Standard |
Status | Current |
Publisher | International Electrotechnical Committee |
Committee | TC 29 |