DIGITAL AUDIO TAPE RECORDER REEL TO REEL SYSTEM, USING 6.3 MM MAGNETIC TAPE, FOR PROFESSIONAL USE - PART 3: FORMAT B
International Electrotechnical Committee
Foreword
Clause
1 Main track recording
1.1 Recording modulation method
1.2 Signal block structure
1.2.1 The word format
1.2.2 The block structure
1.2.3 The Sync/Control word
1.3 Signal word distribution to tracks
1.3.1 Track-to-channel assignment
1.3.2 Signal word distribution to tracks
1.4 Error protection method
1.4.1 Interleaving and parity sums
1.4.2 The CRC word
1.5 Recording and reproducing characteristics
1.5.1 Reference tape
1.5.2 Calibration tapes
1.5.3 Procedure for adjusting recording current
level and waveform
1.5.4 Specifications of tolerance relative to
calibration tape
2 Sub-track recording
2.1 Digital recording method
2.1.1 Recording method on sub-track 2
2.2 Alignment of digital audio signals and sub-track
signals
2.2.1 Alignment of cue audio-1 and cue audio-2
track signals
2.2.2 Alignment of time code track signal
2.2.3 Alignment of Reference track signal
Gives electrical requirements for recording and reproducing equipment. Coverage includes recording modulation method, signal block structure, the sync/control word, error protection method, the data format, the synchronisation pattern, and alignment of digital audio signals and sub track signals.
| Document Type | Standard |
| Status | Current |
| Publisher | International Electrotechnical Committee |
| Committee | TC 60 |
