SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-5: IN SITU MEASUREMENTS OF DISTURBING EMISSIONS PRODUCED BY PHYSICALLY LARGE EQUIPMENT
International Electrotechnical Committee
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Methodology
4.1 Structure of each measurement
4.2 Preliminary measurements and selection of
measurement method
4.3 Selection of the EUT mode of operation and the
reference point depending on the environment
4.4 Assessment of measurement results
5 Method of in situ measurement of conducted disturbance
5.1 General
5.2 Conducted emission measurement procedure
5.2.1 Connection conditions
5.2.2 Reference ground for in situ measurements
5.2.3 Disturbance voltage/current measurements on
cables which carry wanted symmetrical signals
5.2.4 Disturbance voltage measurements on cables which
do not carry wanted symmetrical signals
6 Method of in situ measurement of radiated disturbance
6.1 General
6.2 Measurement conditions
6.3 Measurement methods
6.3.1 Measurement parameters
6.3.2 Measurements in case of interference complaints
6.3.3 Measurements for compliance purposes
6.3.4 Measurements below 30 MHz
7 Measurement report
Bibliography
Deals with in situ electromagnetic disturbance measurements in any environment from physically large equipment and systems excluding networks.
| Document Type | Standard |
| Status | Current |
| Publisher | International Electrotechnical Committee |
| Committee | CIS/H |
