ASME B107.400 : 2008
ASME B107.400 : 2008
Striking Tools (B107.400 - 2008)
American Society of Mechanical Engineers
Specials
-
-
CISPR 28 : 1.0
$78.00 (-56%) $34.32
Table of Contents
Foreword
Committee Roster
Correspondence With the B107 Committee
ASME B107.41 - Nail Hammers
1 Scope
2 Definitions
3 References
4 Performance Requirements
5 Tests
6 Safety Requirements and Limitations of Use
ASME B107.42 - Hatchets and Axes
1 Scope
2 Classification
3 Definitions
4 References
5 Performance Requirements
6 Tests
7 Safety Requirements and Limitations of Use
ASME B107.53 - Ball-Peen Hammers
1 Scope
2 Definitions
3 References
4 Performance Requirements
5 Tests
6 Safety Requirements and Limitations of Use
ASME B107.54 - Heavy Striking Tools
1 Scope
2 Classification
3 Definitions
4 References
5 Performance Requirements
6 Tests
7 Safety Requirements and Limitations of Use
ASME B107.56 - Body Repair Tools
1 Scope
2 Classification
3 Definitions
4 References
5 Performance Requirements
6 Tests
7 Safety Requirements and Limitations of Use
ASME B107.57 - Bricklayers' Hammers and Prospecting Picks
1 Scope
2 Definitions
3 References
4 Performance Requirements
5 Tests
6 Safety Requirements and Limitations of Use
ASME B107.58 - Riveting, Scaling, and Tinner's Setting Hammers
1 Scope
2 Definitions
3 References
4 Performance Requirements
5 Tests
6 Safety Requirements and Limitations of Use
Abstract
The purpose of B107.400 is to define essential performance and safety requirements specifically applicable to the various striking tools covered herein. It specifies test methods to evaluate performance related to the defined requirements and safety, and indicates limitations of safe use. This standard is a combination of: B107.41 Nail Hammers, B107.42 Hatchets and Axes, B107.53 Ball Peen Hammers, B107.54 Heavy Striking Tools, B107.56 Body Repair Tools, B107.57 Bricklayers Hammers & Prospecting Picks, B107.58 Riveting, Scaling, and Tinner's Setting Hammers. In addition to the consolidation of individual struck tools into this standard, principal changes are the uniform inclusion of performance requirements and test methods that evaluate performance and safety, as well as uniform format for sections on definitions, references, performance requirements, tests, and safety requirements and limitation of use.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | American Society of Mechanical Engineers |
| Supersedes |
|
