ASME STP-PT-058 : 2013
ASME STP-PT-058 : 2013
TEMPER BEAD QUALIFICATION HARDNESS ACCEPTANCE CRITERIA
American Society of Mechanical Engineers
Table of Contents
Foreword
Executive Summary
PART I
1 INTRODUCTION
2 OVERVIEW OF CONTROLLED DEPOSITION REPAIR
STRATEGIES
3 REPAIR USING NEAR-MATCHING WELD METAL
4 REPAIR USING NI-BASE WELD METAL
5 HAZ HARDNESS
6 RESIDUAL STRESSES
7 REPAIR OF SERVICE AND AGED MATERIAL
8 CODES AND STANDARDS
9 VARIABLES AFFECTING TEMPER BEAD
10 SUMMARY AND CONCLUSIONS
References - Part I
PART II
1 INTRODUCTION
2 EXPERIMENTAL DETAILS
3 RESULTS
4 DISCUSSION
5 CONCLUSIONS
6 RECOMMENDATIONS
References - Part II
Appendix A - "Poor" and "Optimum" welding procedures
Appendix B - Hardness Test Records
Appendix C - Charpy Test Data
Acknowledgments
Abbreviations and Acronyms
Abstract
Gives an account of work supported by ASME Pressure Technology Codes and Standards (PTCS) through the ASME Standards Technology, LLC (ASME ST-LLC).
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | American Society of Mechanical Engineers |
