ASME STP-PT-079 : 2016

Table of Contents

Foreword
Executive Summary
Abbreviations and Acronyms
1 INTRODUCTION
2 ANALYSIS METHODOLOGY
3 RESULTS
4 RECOMMENDED FUTURE WORK
5 CONCLUSION
Appendix A: Experimental Design Drawings
Appendix B: Prediction Cases Images
References

Abstract

This publication covers the project titled "Local Heating of Piping: Thermal Analysis" as follows. The initial phase of the project served to calibrate and verify the modeling assumptions used for the thermal analysis via comparison with experimental measurements taken for two post weld heat-treated pipes using multiple heating band configurations. The second phase analyzed five pipe diameters. The intent of the second phase was to determine appropriate sizing requirements for heating bands in order to minimize temperature variation around the weld location for pipe diameters ranging from 6 - 30 inches.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	American Society of Mechanical Engineers
Pages
ISBN