AS 4142.2-1993

Table of Contents

1 -  AS 4142.2:1993 FIBRE ROPES - THREE-STRAND HAWSER-LAID AND EIGHT-STRAND PLAITED
4 -  PREFACE
5 -  CONTENTS
6 -  1 SCOPE
6 -  2 REFERENCED DOCUMENTS
7 -  3 DEFINITIONS
7 -  3.1 Three-strand hawser-laid
7 -  3.2 Eight-strand plaited
7 -  3.3 Twist
7 -  3.4 Length of lay of rope
8 -  4 NOTATIONS
8 -  5 DESIGNATION
8 -  6 CLASSIFICATION
8 -  7 CONSTRUCTION
9 -  8 DYEING AND FINISHING
9 -  8.1 General
9 -  8.2 Fungicide content
9 -  9 DIMENSIONS
9 -  9.1 Diameter (three-strand hawser-laid rope only)
9 -  9.2 Length of rope
9 -  9.3 Linear density
9 -  9.4 Length of ten lays
9 -  10 BREAKING FORCE
9 -  11 MARKING
9 -  11.1 General
10 -  11.2 Identification of fibre
11 -  11.3 Statement of compliance
11 -  12 PACKAGING
19 -  APPENDIX A - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
19 -  A1 SCOPE
19 -  A2 STATISTICAL SAMPLING
19 -  A3 PRODUCT CERTIFICATION
19 -  A4 SUPPLIER’S QUALITY SYSTEM
20 -  A5 OTHER MEANS OF ASSESSMENT
20 -  A5.1 General
20 -  A5.2 Example of other means of assessment
20 -  A5.3 Test certificate (if required)
20 -  A5.4 Acceptance
20 -  A5.5 Independent tests
21 -  APPENDIX B - EQUIVALENT DEADWEIGHT BREAKING LOADS FOR THREE-STRAND HAWSER-LAID AND EIGHT-STRAND PLAITED ROPES
21 -  B1 METHOD OF USING EQUIVALENTS
21 -  B2 FITTINGS
21 -  B3 SLINGS AND SIMILAR LIFTING ARRANGEMENTS
21 -  B4 EQUIVALENCE OF THREE-STRAND AND EIGHT-STRAND ROPES

Abstract

Specifies general design, performance and marking requirements for both three-strand hawser-laid and eight-strand plaited fibre ropes.

Scope

This Standard specifies manufacturing and performance requirements for three-strand hawser-laid and eight-strand plaited rope made from natural or man-made textile staple fibre, monofilament or multifilament yarn. Ropes made from the various natural and man-made textiles listed in Clause 6 are covered by this Standard.
NOTES:
1 Some hard-laid rope or rope manufactured for special requirements may not be able to meet all the requirements in this Standard.
2 Advisory information on alternative methods of determining compliance of a lot with this Standard is given in Appendix A.
3 Equivalent deadweight breaking loads are given in Appendix B.1 SCOPE This Standard specifies manufacturing and performance requirements for three-strand hawser-laid and eight-strand plaited rope made from natural or man-made textile staple fibre, monofilament or multifilament yarn. Ropes made from the various natural and man-made textiles listed in Clause 6 are covered by this Standard.
NOTES:
1 Some hard-laid rope or rope manufactured for special requirements may not be able to meet all the requirements in this Standard.
2 Advisory information on alternative methods of determining compliance of a lot with this Standard is given in Appendix A.
3 Equivalent deadweight breaking loads are given in Appendix B.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	TX-004
Supersedes	DR 90139 AS 1504-1983 AS 1752-1983