AS/NZS 4257.8:1994

Table of Contents

1 -  AS/NZS 4257.8:1994 PLASTIC ROOF AND WALL CLADDING MATERIALS - METHODS OF TEST - DETERMINATION OF RESIDUAL STYRENE
1 -  PREFACE
1 -  CONTENTS
2 -  METHOD
2 -  1 Scope and field of application
2 -  2 References
2 -  3 Determination by gas chromatography
2 -  3.1 Principle
2 -  3.2 Reagents
2 -  3.3 Apparatus
2 -  3.4 Preparation of sample
3 -  3.5 Procedure
4 -  3.6 Expression of results
4 -  4 Determination with Wijs’ solution
4 -  4.1 Principle
5 -  4.2 Reagents
5 -  4.3 Apparatus
5 -  4.4 Preparation of sample
5 -  4.5 Procedure
6 -  4.6 Expression of results
6 -  5 Test report

Abstract

This Standard is identical with and reproduced from ISO 4901:1985.

Scope

This International Standard specifies a method of determining the residual styrene monomer content in
reinforced plastics based on unsaturated polyester resins in the polymerized state (hereinafter called UP resins in the polymerized state ), by gas chromatography. The residual styrene monomer content is an important criterion in evaluating the degree of cure of UP resins in the polymerized state. This method is not applicable to UP resins of high chemical resistance.
NOTE - If other volatile aromatic hydrocarbon monomers are present in significant quantities, see ISO 2561 for the procedure to be followed in their determination.
This International Standard also specifies a method of determining residual styrene monomer by the Wijs
method for laboratories in which gas chromatography is not available.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	PL-022
Supersedes	DR 93106