AS/NZS 4358:1996

Table of Contents

1 -  AS/NZS 4358:1996 MEDICAL DIAGNOSTIC X-RAY EQUIPMENT-RADIATION CONDITIONS FOR USE IN THE DETERMINATION OF CHARACTERISTICS
4 -  PREFACE
5 -  CONTENTS
7 -  INTRODUCTION
8 -  1. Scope and object
8 -  *1.1 Scope
8 -  *1.2 Object
9 -  2 Normative references
10 -  3 Terminology
10 -  3.1 Degree of requirements
10 -  3.2 Use of terms
10 -  3.3 Defined terms
10 -  3.3.1 REFERENCE POI NT:
10 -  3.3.2 EXIT SURFACE:
10 -  3.3.3 APPLICATION PLANE:
10 -  3.3.4 APPLICATION DISTANCE:
11 -  3.3.5 HALF-VALUE LAYER TEST DEVICE:
11 -  3.3.6 RADIATION CONDITION:
11 -  3.3.7 RADIATION QUALITY:
11 -  4 Common aspects – Adjustment procedures
11 -  *4.1 Standard RADIATION CONDITIONS
11 -  4.2 Adjustment procedure to establish standard RADIATION CONDITIONS
11 -  4.3 RADIATION DETECTOR
12 -  5 Standard RADIATION QUALITIES RQR
12 -  5.1 Object
12 -  5.2 Characterization
12 -  *5.3 Description
13 -  5.4 Test equipment
13 -  5.4.1 HALF-VALUE LAYER TEST DEVICES
13 -  5.4.2 Auxiliary filter
14 -  5.4.3 DIAPHRAGM
14 -  5.4.4 RADIATION DETECTOR –see4.3
14 -  *5.5 Generation and verification of the standard RADIATION QUALITIES RQR
14 -  6 Standard RADIATION QUALITIES RQA
14 -  6.1 Object
15 -  6.2 Characterization
15 -  *6.3 Description
16 -  6.4 Test equipment
16 -  6.4.1 HALF-VALUE LAYER TEST DEVICES
16 -  6.4.2 DIAPHRAGM
16 -  6.4.3 RADIATION DETECTOR
16 -  *6.5 Generation and verification of the standard RADIATION QUALITIES RQA
18 -  7 Standard RADIATION CONDITIONS RQN
18 -  7.1 Object
18 -  7.2 Characterization
18 -  7.3 Description
19 -  7.4 Test equipment (DIAPHRAGMS)
19 -  7.5 Generation of the standard RADIATION CONDITIONS RQN
19 -  8 Standard RADIATION CONDITIONS RQB
19 -  8.1 Object
19 -  8.2 Characterization
20 -  8.3 Description
20 -  8.4 Test equipment (DIAPHRAGMS)
20 -  8.5 Generation of the standard RADIATION CONDITIONS RQB
21 -  9 Standard RADIATION CONDITION RQN-M
21 -  9.1 Object
21 -  9.2 Characterization
21 -  9.3 Description
21 -  9.4 Test equipment (DIAPHRAGMS)
22 -  *9.5 Generation of the standard RADIATION CONDITION RQN-M
22 -  10 Standard RADIATION CONDITION RQB-M
22 -  10.1 Object
22 -  10.2 Characterization
22 -  10.3 Description
23 -  10.4 Test equipment (DIAPHRAGM)
23 -  * 10.5 Generation of the standard RADIATION CONDITION RQB-M
31 -  Annex A - Terminology - Index of defined terms
33 -  Annex B - Rationale
35 -  Annex C - Application of standard RADIATION CONDITIONS in the medical field

Abstract

Specifies methods for identifying the most important characteristics of diagnostic X-ray equipment and the relevant associated test methods, so that the characteristics can be stated in a standardized way to facilitate comparison between devices. This Standard is identical with and reproduced from IEC 1267:1994.

Scope

This International Standard applies to test procedures which, for the determination of characteristics of systems or components of medical diagnostic X-RAY EQUIPMENT, require well-defined RADIATION CONDITIONS.
Except for mammography, this standard does not apply to conditions where discontinuities in radiation absorption of elements are deliberately used to modify properties of the RADIATION BEAM (for example by rare earth filters).
Speed measurements of screen-film systems are not included in this standard. This topic will be covered by an ISO standard.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
Pages
ISBN
Committee	HE-003
Supersedes	DR 95128