Textile floor coverings - Tests and measurements Machine-made textile floor coverings - Determination of total thickness
Standards Australia
RECONFIRMATION NOTICE
Technical Committee TX-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 8 January 2016.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 18 May 2016.
The following are represented on Technical Committee TX-009:
Australian Chamber of Commerce and Industry
AWTA Textile Testing
Building and Construction Industry Training Organisation (New Zealand)
Carpet Institute of Australia
Carpet Institute of Australia (Australian Carpet Classification)
Council of Textile and Fashion Industries of Australia
CSIRO
Floorcovering Association of NSW
Floorcovering Association of Victoria
Individual Cleaners Association of Australia and New Zealand
New Zealand Wool Testing Authority
RMIT University
Specialised Cleaning and Restoration Industry Association
This International Standard specifies a basic method for the determination of the thickness of machine-made textile floor coverings. Where areas of different thickness or construction exist, these should be tested separately if possible. This method forms an integral part of other methods of test for textile floor coverings and the result of this test by itself cannot be used as an indication of the quality of the product. The method is applicable to all machine-made textile floor coverings.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 10/06/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 10/06/2016 |
| Committee | TX-009 |
| Supersedes |
|
