AS 3719.2-1998 (R2016)

Table of Contents

Abstract

Sets out a gravimetric method for the determination of silicon in aluminium alloys in the range 0.30% to 13%.
RECONFIRMATION NOTICE
Technical Committee CH-010 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 1 November 2016.
The following are represented on Technical Committee CH-010:
Bureau of Steel Manufacturers of Australia
International Copper Association Australia
International Precious Metals Institute
National Association of Testing Authorities Australia

Scope

This Standard sets out a gravimetric method for the determination of silicon in aluminium and aluminium alloys. This method applies to the determination of silicon in aluminium and aluminium alloys in the range 0.30% to 13%. The method has been modified for the following conditions:
(a) Aluminium-silicon alloys with silicon content greater than 3% and aluminium-magnesium alloys (see Appendix A).
(b) Aluminium alloys containing tin or antimony (see Appendix B).

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 18/11/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 18/11/2016
Pages
ISBN
Committee	CH-010
Supersedes	DR 97180 CP AS 3719.2-1990