AS 2434.1-1999 (R2013)

Table of Contents

1 -  AS 2434.1-1999 METHODS FOR THE ANALYSIS AND TESTING OF LOWER RANK COAL AND ITS CHARS - DETERMINATION OF THE TOTAL MOISTURE...
4 -  PREFACE
4 -  CONTENTS
5 -  SECTION 1 SCOPE AND GENERAL
5 -  1.1 SCOPE
5 -  1.2 REFERENCED DOCUMENTS
5 -  1.3 DEFINITIONS
5 -  1.4 SAFETY
6 -  1.5 SAMPLING AND SAMPLE PREPARATION
6 -  1.6 REPORTING OF RESULTS
6 -  1.7 PRECISION
6 -  1.8 TEST REPORT
7 -  SECTION 2 TWO-STAGE METHOD
7 -  2.1 SCOPE OF SECTION
7 -  2.2 PRINCIPLE
7 -  2.3 REAGENTS
7 -  2.4 APPARATUS
8 -  2.5 TEST SAMPLE
8 -  2.6 PROCEDURE
9 -  2.7 CALCULATIONS
9 -  2.7.1 Free moisture
9 -  2.7.2 'Air-dry' moisture
9 -  2.7.3 Total moisture
10 -  SECTION 3 SINGLE-STAGE METHOD
10 -  3.1 SCOPE OF SECTION
10 -  3.2 PRINCIPLE
10 -  3.3 REAGENTS
10 -  3.4 APPARATUS
10 -  3.5 TEST SAMPLE
10 -  3.6 PROCEDURE
11 -  3.7 CALCULATION
12 -  SECTION 4 AZEOTROPIC DISTILLATION
12 -  4.1 SCOPE OF SECTION
12 -  4.2 PRINCIPLE
12 -  4.3 REAGENT
12 -  4.4 APPARATUS
12 -  4.5 TEST PORTION
12 -  4.6 PROCEDURE
13 -  4.7 CALCULATION

Abstract

Sets out three methods for the determination of the total moisture content of lower rank coal.

RECONFIRMATION NOTICE
Technical Committee MN-001 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 15 July 2013.
The following are represented on Technical Committee MN-001:

Australasian Institute of Mining and Metallurgy
Australian Coal Association
Australian Coal Industry Reference Samples
Australian Coal Preparation Society
Bureau of Steel Manufacturers of Australia
Coalfield Geology Council of NSW
CSIRO Energy Technology
National Association of Testing Authorities Australia
National Generators Forum
The University of New South Wales
The University of Queensland
University of Newcastle


To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

This Standard sets out three methods for the determination of the total moisture content of lower rank coal. The first method is a two-stage procedure applicable to large (500 g) samples. The second method involves drying under a stream of flowing nitrogen, and is applicable only to laboratory samples with mass of about 10 g. The third method comprises an azeotropic distillation with toluene, and is applicable to a sample mass of 200 g to 500 g.

This Standard is applicable to bed-moist coals or analysis samples, where the moisture is expected to exceed 15 percent.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 12-08-2013
Pages
ISBN
Committee	MN-001
Supersedes	AS 2434.1-1991 DR 99278 CP