Mechanical properties of fasteners made of carbon steel and alloy steel Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm.
Standards Australia
Specifies a test procedure for the determination of torsional strength and the minimum breaking torques of bolts and screws with nominal diameters 1 mm to 10 mm and with property classes 8.8 to 12.9. The test applies to bolts and screws with thread less than M3 for which no breaking and proof loads are indicated in AS/NZS 4291.1, as well as to short bolts and screws tensile test. This Standard is identical with and reproduced from ISO 898-7:1992.
RECONFIRMATION NOTICE
Technical Committee ME-029 has reviewed the content of this publication and in
accordance with Standards Australia procedures for reconfirmation, it has been
determined that the publication is still valid and does not require change.
Reconfirmed documents cannot be amended, but may be formally revised and a new
edition published.
Certain documents referenced in the publication may have been amended since the
original date of publication. Users are advised to ensure that they are using the latest
versions of such documents as appropriate, unless advised otherwise in this
Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for
reconfirmation on 22 July 2015.
Reconfirmed documents cannot be amended, but may be formally revised and a new
edition published.
The following are represented on Technical Committee ME-029:
Association of Accredited Certification Bodies
Association of Wall and Ceiling Industries of Australia & NZ
Australasian Corrosion Association
Australian Chamber of Commerce and Industry
Australian Engineered Fasteners and Anchors Council
Australian Industry Group
Australian Steel Institute
AUSTROADS
Bureau of Steel Manufacturers of Australia
CSIRO
Galvanizers Association of Australia
Materials Australia
National Association of Steel-Framed Housing
National Association of Testing Authorities Australia
New Zealand Heavy Engineering Research Association
Society of Automotive Engineers - Australasia
Steel Construction New Zealand
Swinburne University of Technology
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 28/08/2015. Reconfirmation Notice 28/08/2015 |
| Committee | ME-029 |
| Supersedes |
|
