AS 2879.8-2000 (R2013)

Table of Contents

1 -  AS 2879.8-2000 ALUMINA - DETERMINATION OF BULK DENSITY
4 -  PREFACE
4 -  CONTENTS
5 -  1 SCOPE
5 -  2 REFERENCED DOCUMENTS
5 -  3 PRINCIPLE
5 -  4 SAFETY
5 -  5 APPARATUS
5 -  5.1 Sample delivery apparatus
5 -  5.2 Receiver
6 -  5.3 Laboratory top-pan balance
6 -  5.4 Metal straight edge
6 -  5.5 Sieve
6 -  6 SAMPLE HANDLING AND PREPARATION
6 -  7 PROCEDURE
6 -  7.1 Moisture determination
6 -  7.2 Unpacked bulk density determination
7 -  7.3 Packed bulk density determination
7 -  8 CALCULATION AND REPORTING OF RESULTS
7 -  9 PRECISION
8 -  10 TEST REPORT

Abstract

Sets out a method for the determination of unpacked and packed bulk density of smelter-grade aluminium oxide primarily used for the production of aluminium.

RECONFIRMATION NOTICE
Technical Committee MN-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 9 April 2013.
The following are represented on Technical Committee MN-009:

Australian Institute of Mining and Metallurgy
Australian Aluminium Council
Minerals Council of Australia
Royal Australian Chemical Institute



To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

This Standard sets out a method for the determination of unpacked and packed bulk density of smelter-grade aluminium oxide primarily used for the production of aluminium.
Methods using the fall of sample into a receptacle have been found to be sensitive to flow rate variations, which are caused by physical properties of the aluminium oxide.
This method minimizes rate variations.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 18-07-2013
Pages
ISBN
Committee	MN-009
Supersedes	DR 99139