Self-drilling screws for the building and construction industries General requirements and mechanical properties
Standards Australia
Specifies the dimensions, thread forms, lead types, mechanical properties and performance and working requirements for self-drilling screws intended for drilling and tapping into steel and fixing to timber.
RECONFIRMATION NOTICE
Technical Committee ME-029 has reviewed the content of this publication and in
accordance with Standards Australia procedures for reconfirmation, it has been
determined that the publication is still valid and does not require change.
Reconfirmed documents cannot be amended, but may be formally revised and a new
edition published.
Certain documents referenced in the publication may have been amended since the
original date of publication. Users are advised to ensure that they are using the latest
versions of such documents as appropriate, unless advised otherwise in this
Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for
reconfirmation on 22 July 2015.
Reconfirmed documents cannot be amended, but may be formally revised and a new
edition published.
The following are represented on Technical Committee ME-029:
Association of Accredited Certification Bodies
Association of Wall and Ceiling Industries of Australia & NZ
Australasian Corrosion Association
Australian Chamber of Commerce and Industry
Australian Engineered Fasteners and Anchors Council
Australian Industry Group
Australian Steel Institute
AUSTROADS
Bureau of Steel Manufacturers of Australia
CSIRO
Galvanizers Association of Australia
Materials Australia
National Association of Steel-Framed Housing
National Association of Testing Authorities Australia
New Zealand Heavy Engineering Research Association
Society of Automotive Engineers - Australasia
Steel Construction New Zealand
Swinburne University of Technology
This Standard specifies the general requirements and mechanical properties for the following types of self-drilling screws used in the building and construction industries:
(a) Screws for drilling and tapping into layered or unlayered steel of 0.9 mm minimum total thickness.
(b) Screws for drilling and tapping into timber.
(c) Screws for fixing plasterboard to steel with a maximum thickness of 0.8 mm.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 28/08/2015. Reconfirmation Notrice 28/08/2015 |
| Committee | ME-029 |
| Supersedes |
|
