AS IEC 60300.3.10-2004 (R2016)

Table of Contents

Abstract

Provides guidance on how the maintenance aspects of the tasks should be considered in order to achieve optimum maintainability. It should be noted that the full programme described in this Standard would only be applied to a major complex product with the potential for long-term usage. It is identical with, and has been reproduced from IEC 60300-3-10:2001.
RECONFIRMATION NOTICE
Technical Committee QR-005 has reviewed the content of this publication and in
accordance with Standards Australia procedures for reconfirmation, it has been
determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the
original date of publication. Users are advised to ensure that they are using the latest
versions of such documents as appropriate, unless advised otherwise in this
Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for
reconfirmation on 07 December 2015.
The following are represented on Technical Committee QR-005:
Asset Management Council
Australian Industry Group
Department of Defence (Australian Government)
Engineers Australia
Independent Transport Safety & Reliability Regulator
Institution of Professional Engineers New Zealand
New Zealand Institute of Safety Management
New Zealand Society for Risk Management
Risk Management Institution of Australasia
The University of New South Wales
University of Wollongong

Scope

This International Standard, which forms part of the series of standards in the IEC 60300-3
series, is the application guide for maintainability. It can be used to implement a
maintainability programme covering the initiation, development and in-service phases of a
product, which form part of the tasks described in IEC 60300-2.
It provides guidance on how the maintenance aspects of the tasks should be considered in
order to achieve optimum maintainability. It should be noted that the full programme described
in this standard would only be applied to a major complex product with the potential for long-
term usage.
For less complex maintainable products, a simpler programme should be adopted by tailoring the programme to suit the degree of complexity and the requirements of the customer. The standard uses other IEC standards and guides, notably IEC 60706, as reference documents or tools to provide more detail as to how a task should be undertaken.
Contracts between customer and supplier will vary widely according to conditions and circumstances in different industries. This standard is written on the premise that a product is to be developed by a contractor from a basic concept for the particular requirements of a user when the product is considered to be a development item (DI). However, in many instances, where a product already exists and needs little or no development effort; it is a Non-development item (NDI) and the full maintainability programme as described in this standard will not be required. However, the principles laid down in the standard can be applied as required, by tailoring the maintainability programme to suit the needs of the project.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 03/06/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 03/06/2016
Pages
ISBN
Committee	QR-005
Supersedes	DR 03533 CP