Paints and related materials - Pavement marking materials Thermoplastic pavement marking materials - For use with surface applied glass beads
Standards Australia
Specifies requirements for thermoplastic markings formulated with Type C glass beads complying with AS 2009.
RECONFIRMATION NOTICE
Technical Committee CH-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 30 October 2015.
The following are represented on Technical Committee CH-003:
Australasian Corrosion Association
Australian Institute of Building
Australian Paint Manufacturers’ Federation
Australian Wall and Ceiling Association
CSIRO
Institution of Professional Engineers New Zealand
Master Painters Australia
Master Painters New Zealand Association
National Painting and Decorating Institute
Safe Work Australia
Surface Coatings Association Australia
This Standard sets out requirements for thermoplastic markings formulated with Type C glass beads complying with AS/NZS 2009, already incorporated into the mix.
Alternative means for determining compliance with this Standard are given in Appendix A.
Additional information on the use and application of thermoplastic pavement marking materials, is contained in Appendix B.
Four types of thermoplastic road marking material considered by this Standard are:
Spray.
Extruded.
Screed.
Preformed.
This Standard does not set out requirements for profiled thermoplastic marking materials.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 27/05/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 27/05/2016 |
| Committee | CH-003 |
| Supersedes |
|
