AS 3730.27-2006 (R2016)
AS 3730.27-2006 (R2016)
Guide to the properties of paints for buildings Clear coatings for interior timber floors
Standards Australia
Specials
-
-
SAE AMS L P 391 : 2011
$78.00 (-56%) $34.32
Table of Contents
Abstract
Provides a guide to the features and typical characteristics that are expected of interior clear coatings for timber floors when applied by brush or pad applicator in accordance with the manufacturer’s instructions.
RECONFIRMATION NOTICE
Technical Committee CH-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 27 April 2016.
The following are represented on Technical Committee CH-003:
Australasian Corrosion Association
Australian Institute of Building
Australian Paint Manufacturers’ Federation
Australian Wall and Ceiling Association
CSIRO
Institution of Professional Engineers New Zealand
Master Painters Australia
Master Painters New Zealand Association
National Association of Testing Authorities Australia
National Painting and Decorating Institute
Safe Work Australia
Surface Coatings Association Australia
Scope
This document provides a guide to the features and typical characteristics that are expected of interior clear coatings for timber floors when applied by brush or applicator (pad/lambswool) in accordance with the manufacturer’s instructions.
Products complying with this Standard may be one of the following types:
Type 1 - Single-pack solvent-based oxidising tung oil-based.
Type 2 - Single-pack solvent-based or solvent-free moisture cure urethane.
Type 3 - Two-pack solvent-based or solvent-free polyurethane.
Type 4 - Water-based.
Paints satisfying the requirements of this guide are equivalent to paint Type B19, B19A, B20 or B43 of AS/NZS 2311, Table 4.1.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 17/06/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 17/06/2016 |
| Committee | CH-003 |
| Supersedes |
|
