AS/NZS 3750.20:2008
AS/NZS 3750.20:2008
Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free
Standards Australia
Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free
Standards Australia
Specifies requirements for solvent-borne pigmented metal priming paints as part of a system for the protection of iron and steel against atmospheric corrosion.
This Standard sets out requirements for solvent-borne pigmented metal priming paints as part of a system for the protection of iron and steel against atmospheric corrosion. They are intended to be applied as supplied by brush, roller or spray to provide resistance to weathering, washing and intermittent contact with petrol or mineral oils. The Standard deals with primers that are surface dry within 2 h and may be overcoated after 24 h.
This paint complies with Type C05 of AS/NZS 2312 and is a lead and chromate-free version of the paint described in AS/NZS 3750.19.
This Standard applies to paints intended for the priming of well-cleaned steel surfaces. These products should be overcoated with a paint system specified by AS/NZS 2312 such as ALK5 or ALK6.
NOTES:
1 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.
2 Additional information on the use and application of metal primers is given in Appendix B.
Document Type | Standard |
Status | Current |
Publisher | Standards Australia |
ProductNote | Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn. |
Committee | CH-003 |
Supersedes |
|