AS 3750.10-2008
AS 3750.10-2008
Paints for steel structures Full gloss epoxy (two-pack)
Standards Australia
Specials
-
-
API MPM CH4.6 : 1999
$78.00 (-56%) $34.32
Abstract
Specifies requirements for a two-component, full gloss epoxy paint for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment.
Scope
This Standard specifies requirements for a two-component, full gloss epoxy paint for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. It is suitable for application by brush, roller or spray. Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference C24.
This paint is intended for use as a topcoat in paint systems for the protection of iron and steel against corrosion involving wet and damp areas, high humidity, coastal/marine and industrial fallout.
NOTES;
1 This paint may be used as detailed for systems EPF1in AS/NZS 2312.
2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.
3 Additional information on the use and application of epoxy paints is contained in Appendix B.
4 The paint is available in a range of colours.
5 Full gloss epoxy paints should not be used as a finish coat in exterior applications where retention of colour and gloss is required for long periods of time.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn. |
| Committee | CH-003 |
| Supersedes |
|
