AS/NZS 2269.0:2012
AS/NZS 2269.0:2012
Plywood - Structural Specifications
Standards Australia
Abstract
Specifies minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand.
Scope
This Standard specifies requirements for the manufacture, grading, finishing and branding of structural plywood. Specifications for both stress and surface grades are also provided. The Standard also specifies veneer quality, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and characteristic strength and stiffness values for the nominated F-grades.
The following alternative methods for the determination of stress grades for structural plywood are also provided:
(a) Mechanical F-grading of the finished sheet of plywood.
(b) In-grade testing of finished plywood panels.
Five surface grades, based on the veneer quality of the face and back veneers, A, S, B, C and D and one bond quality, Type A bond, are prescribed.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| Committee | TM-008 |
| Under Revision |
|
| Supersedes |
|
