AS 4055-2012

Abstract

Specifies site wind speed classifications for determining design wind speeds and wind loads for housing that is within specified geometric limits. Wind speeds are specified for the serviceability and ultimate strength/stability limit states.

Scope

This Standard specifies site wind speed classes for determining design wind speeds and wind loads for NCC buildings Classes 1 and 10 within the geometric limits given in Clause 1.2. The classes are for use in the design of housing and for design, manufacturing and specifying of building products and systems used for housing.
Wind loads for houses not complying with the geometric limits given in Clause 1.2 are outside the scope of this Standard.
NOTES:
1 Commentary on the clauses of this Standard is given in Appendix A.
2 A worked example for the determination of topography is given in Appendix B.
3 Worked examples for the determination of terrain category and shielding class are given in Appendix C.
4 A worked example for racking forces is given in Appendix D.
5 Where houses do not comply with the geometric and other limitations of this Standard, use AS/NZS 1170.2.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	BD-099
Under Revision	DR AS 4055-2012 Amd 1:2015
Supersedes	DR AS 4055 AS 4055-2006